lemann

joined 9 months ago
[–] lemann@lemmy.dbzer0.com 5 points 3 weeks ago (2 children)

The few times I've needed to man [app name] on a system without internet access or on an obscure utility, I've always been able to find what I need in the included docs

I hope the dev eventually gets sponsored, this is one of those utilities that you don't think you need until --help doesn't cut it

[–] lemann@lemmy.dbzer0.com 0 points 4 weeks ago* (last edited 4 weeks ago)

For anyone who doesn't have a device that natively supports this feature, there's an app on F-Droid called "Privacy Indicators" that provides this for camera and mic access. It uses the built-in Accessibility services to provide this, and needs a couple of other special permissions

You can change the color of the indicator, mine's red for more visibility.

I installed it from GitHub however, since the F-Droid build was really outdated: https://github.com/NitishGadangi/Privacy-Indicator-App

[–] lemann@lemmy.dbzer0.com 0 points 4 weeks ago

I love this 😂

[–] lemann@lemmy.dbzer0.com 0 points 4 weeks ago (3 children)

I've seen the redesign too and not really sure how I feel about it 😂 there's a lot of additional whitespace and it kinds looks like a blown up mobile version of the site

[–] lemann@lemmy.dbzer0.com 22 points 1 month ago* (last edited 1 month ago)

Those are fake mirrors completely missing aniwave's core features: account watchlists, auto skip intro/outro, auto next, watch together, and the comments don't even work.

Wouldn't surprise me if they're missing the majority of Aniwave's library too

Edit: The search is horrifically basic too. No filters at all, seriously? The clones don't even try to compete 🤦‍♂️

[–] lemann@lemmy.dbzer0.com 17 points 1 month ago

Pirate websites like this usually rely on the shadier ad networks baked into these kinds of video streaming sites to make their money.

There's no financial incentive to use BitTorrent based streaming, and if they did I feel the torrents would die rapidly just due to the amount of leechers with barely any seeders to offset the ratio disparity (Unless some kind of webseed was available ?)

[–] lemann@lemmy.dbzer0.com 3 points 1 month ago (1 children)

I recently picked up an iPhone as a secondary device, pretty much immediately disabled iCloud and installed Mobius (Syncthing) so the photos get sync'ed over to my fairphone's SD card.

Now i'm second guessing whether it's actually disabled, or if I'm going to get an iCloud full warning in a couple of months....

[–] lemann@lemmy.dbzer0.com 6 points 1 month ago

I use Open Camera on my device, there are some very rare instances where it shows an obscure error saying it can't find a gallery app. Most of the time though it opens Fossify Gallery just fine

I'm rooted and Google Photos was removed from my device before a single photo was taken, so never seen or heard even a peep from it

[–] lemann@lemmy.dbzer0.com 0 points 1 month ago (1 children)

.NET runs natively on Linux

Only .NET Core sadly

When I moved my personal laptop to Linux I needed WINE to run some source-available .NET apps that were written targeting the Windows-only .NET Framework

[–] lemann@lemmy.dbzer0.com 6 points 1 month ago (1 children)

I have to admit I'm not entirely convinced these requests are coming from a compiler...

Is it possible for you to virtualize an non-networked system with your GPU passed through? That seems like the best option IMO. Next best thing would be to set up an airgapped machine just for this, but not everyone has a 2nd machine.

Personally when I was trying out local LLMs I used a virtual machine, mainly due to the known code execution vulnerability related to Tensorflow model data being saved in python's Pickle format. I believe the recommended save method changed twice since those days though.

With the Firefox stuff I'm assuming you've also checked their enterprise config options too (which are admittedly difficult to find and piece together online), so not too sure what else you could do except aside from continuing to block them. Librewolf however provides documentation on how to disable the extra requests sent from their browser in their FAQ, and covers some preferences on the subsequent page linked at the bottom

[–] lemann@lemmy.dbzer0.com 6 points 1 month ago (3 children)

Nothing concerning for me here personally. However, if you have an issue with Firefox's 'QoL' features dependent on Mozilla infrastructure, you could consider Librewolf instead as an alternative.

As for the reverse lookup requests, those are targeting local multicast addresses on your internal network, except the last one which is for the Fastly CDN service

[–] lemann@lemmy.dbzer0.com 0 points 1 month ago (1 children)

And not to mention the custom control panel applets hanging around out there from who-knows-what vendors.

AMD FirePro and Catalyst users are going to probably stay on an older version of the OS, considering most of those users are going to be educational institutions, engineering workshops, makerspaces/hackerspaces etc.

Can't think of any other vendor products that integrated quite as much into the legacy control panel area

 

I've been looking into this material due to the really nice surface finish and clean look (actually purchased some already 😅)

However I recently came across a video by CNC kitchen where he raised some potential health concerns relating to the fibers specifically inside the filament. One of the commenters mentioned they couldn't wash the fibers off their skin, and another likened it to the "3d printing equivalent of asbestos"

I don't plan to print with it just yet due to needing a hardened nozzle, and spare extruder parts. However when I do, i'm feeling a little worried about how safe it is - mainly whether the final printed part is fine for occasional skin contact, or whether this material should ideally be left to just cosmetic parts.

P.S. image not mine, taken from here

 

I'll admit I'm a little lost/down, it came out of nowhere! Over the years he's produced an endless stream of genuinely interesting videos. I can't really think of any other video hosts that can make a wide range of topics sound so interesting.

Probably I'm just scared of change...

On the flip side though, I'm really happy that he's decided his personal happiness is more important, and has decided to focus on people close to him.

What are your thoughts?

 

This is a pretty neat tour of Prusa's printer factory on the Strange Parts channel

They have an absolutely massive 600 printer farm, with the same mk3 and mk4 machines that they sell to customers, which is really impressive.

They do almost everything in-house, including manufacturing the printer mainboards, for faster project planning and turnaround times.

Note - the video is pretty long at about 40 mins!

After watching I'm a little tempted to pick up some prusament filament to support the company, really like how they are supporting local talent.

 

I've wanted one of these for a while, decided to bite the bullet a couple days ago! Seeing as I was somewhat familiar with CAD software (from engineering classes several years ago) it seemed fairly straightforward.

As someone completely new to this, there have been a TON of things I've learned from binging 3d printing channels...

  • First layer adhesion 😭
  • Bed levelling
  • Types of extruders (bowden/direct) and how they affect what materials you can print
  • Tons of printing materials, personally will be using PETG and PLA
  • Keeping filament dry in a vacuum bag

And soo much more - but there is still a lot that I have absolutely no idea about.

The printer is a second-hand Flsun Q5, the seller sent it fully assembled (very, very brave of them, but it arrived unharmed). I had a brief look around at other options, but for the price of an easythreed, this was a no brainer.

I think the seller had some issues with bed adhesion, as there was a ton of slimy stuff on the print bed when it arrived. Used some isopropyl alcohol and a dish sponge to scrub it off, seems all fine now!

I had some issues with the Z-offset but got it good enough to where there is some first layer adhesion.

Model finished printing while I was drafting this post, I sprayed some contact cleaner onto the glass bed to take it off (is that bad?). There's some stringing:

 

I bought a 3d printer off Ebay which got delivered not too long ago, and it came with 2 sd cards - one with a build video and some demo print files, but worryingly another card that has all the previous owner's personal files on there.

Not sure whether to format it, or to contact the seller offering to send the card back (free of charge)... how would you prefer to be approached in a similar situation?

Edit: No gcode files are on the card, just 30gb of pictures, music and videos. Sent the seller a message offering to upload it to cloud or to send the card back

view more: next ›