Stephen304

Prusa slicer, partially because I have a mk3s+ but also because I tried to use cura many times but always several minutes into using it, my entire laptop just shuts off, like the power was pulled, no logs written to disk, no error message. It's the only program to do that and I can't even report an issue because there's no logs I can submit. I assume it's related to taxing my GPU in a way that causes a power related fault.

Are specials requestable in jellyseerr? They aren't in overseerr, so they have to be manually requested in sonarr. Also, sonarr uses tvdb and as I understand it, it's unlikely to ever support tmdb, so if jellyseerr uses tmdb like overseerr does, then that could be another source of confusion if there are differences.

For now if you use sonarr you just have to accept tvdb and set other things to use tvdb where possible (Plex and jellyfin), and accept mismatches where it can't be changed (like overseerr / possibly jellyseerr too since it's a fork)

This would be huge, one of the biggest draws to Plex for me is being able to use a single account to watch content across all my friends servers from any Plex UI (be it the hosted one at app.plex.tv or the copy hosted with each Plex server)

Stuff like this really makes me want to switch to jellyfin, but I watch stuff from me and my friend groups libraries and Plex lets me search for shows across my entire friend group at once. I'm afraid I'll be waiting forever for jellyfin to allow federating servers so that bob@red.instance can share a library with alice@blue.instance allowing Alice to browse red+blue instance content from their home instance UI instead of requiring an account with every instance.

Sure, most of them are posted here: https://www.printables.com/@StephenSmith

I almost exclusively print functional things so here's my list of things I've designed or printed:

• Tubular key to bypass paying for laundry
• Furniture leg extensions on almost all my furniture to give minimum 4" clearance for the robovac
• Custom mounting bracket / spacer for mounting road sign to the wall with command strips
• Tapestry mounting shim to clamp tapestry in binder clips to hang on the wall without ripping the tapestry
• Rubber band powered sandal holders that stick to the wall and clamp onto sandals which can be used without using your hands / while holding something (I needed to keep my basement sandals from being eaten by my old robovac and I needed to be able to put them on and put them back without needing to put down anything heavy I'm taking to/from the basement, and the space required it to be flat against the wall)
• Replacement shelf pegs for bathroom shelves which are normally only sold in 20 packs for >5$ when I only needed 1, the print cost like 1c instead
• Replacement D-slotted electrical box key since the one that came with the box broke
• Backyard lamp holder that attaches to the fence pole and provides a loop to hang a lamp
• Replacement side panel clip for my PC case which came with 1 broken - manufacturer doesn't sell replacements
• Custom piece for 2 sectional couch legs to slot into which keeps the 2 halves of my couch from sliding apart causing someone to fall in between onto the floor

Some of this could have been bought online but having a 3D printer really reveals how overpriced plastic stuff is. I rarely print something that costs me more than a few dollars in filament - and that's if it's a very large object, it's easily less than the shipping cost of an equivalent item alone, and small things can often only be found in large packs online while usually costing only a couple cents to print. And plenty of the stuff I print benefits from being able to be made custom and to the exact dimensions I need, for example the furniture leg extensions I made fit perfectly on the furniture legs and raise them up exactly as high as they need to be for my robovac to go under, not a centimeter more. A whiteboard marker caddy I made holds the exact number of markers I have / want to have and attaches under a light switch wall plate which I designed in order to avoid needing to attach it with command strips or screws (it gets clamped between the wall plate and the wall by the existing light switch screws). The first item I listed, the tubular key, was printed with the exact bitting needed for the lock (layer height of 0.05mm is enough vertical resolution for the key to work).

Was also gonna say this since expensive gadgets weren't excluded. I played a bunch of VR minigolf over pandemic to socialize with my irl friends who I couldn't hang out with and these days VR has been the center of more than half of the social gatherings at my place where I demo games and we pass the headset around for everyone to try different stuff. Seeing new people try VR for the first time never gets old.

After watching a Jackson galaxy video on how to stop your cat from waking you up early, I followed the advice of never feeding immediately after getting up, and instead doing a certain activity first, like making coffee. After a month of taking a shower before feeding, my cat no longer makes any noise in the morning and only starts getting noisy when I step out of the shower. So thats a good tip for those who can't free feed. I also started collecting every toy and putting them in a secure box before bed since she has a tendency to chase toys around in the middle of the night and yelp with one in her mouth.

My roborock has been revolutionary for my apartments cleanliness. I've had it about 1.5 years and I've only emptied the dock's bag twice (I live in a small apartment). I have the water change kit so it auto refills the docks clean water tank from the laundry hookup and auto empties dirty mop water down the laundry room's drain. I only have to clean the sensors and rinse the drain screen every 2-3 weeks but otherwise it's on autopilot on a schedule and my floors are spotless and free of dust and cat fur.

That looks like an imax release, maybe the top/bottom black bars are on the Blu-ray it was ripped from to make it fit 16:9? Since it's a remux they shouldn't have touched it to remove the bars.

You can use bazarr to batch generate whisper subtitles for your Plex/jellyfin/kodi library: https://wiki.bazarr.media/Additional-Configuration/Whisper-Provider/

It doesn't need to be realtime since you can pre generate an srt with time codes beforehand using something like bazarr. Whisper also runs faster than realtime in most model sizes, up to 32x realtime so it can really be worth it to add auto subtitles to media in your collection that's missing subtitles as a one time job.