Selfhosted

Finish my migration to my local Kubernetes cluster. Tired of running a mix of vms, docker, and bare metal. I got it setup and a few things, just have to power through.

I also need to bump the drive size in my NAS as I’m running low and want to leverage it more, not less. (Pods use PVs hosted on the NAS over NFS or iSCSI).

And get my offsite backups going again, I had to move this last year and it put a real damper on my goals for last year so there’s a lot of “got the stuff just have to make it work”.

Edit: the UDM Pro is pretty nice. That, a rack and a 2.5G enterprise switch were last year’s acquisitions.

1. Install Comms box in office.
2. Get Unifi switch.
3. Run Cat6A to all rooms of house.
4. Consolidate NUC and N100's fewer devices.
5. Install 2x U6 Wall units. 6 Begin scoping Surveillance cameras. Torn between Synology and Unifi.

I'm designing a modular rack shelf mounted 3D printed server case. I hope to finish it by moving my backup server to the new case.

Move from Ubuntu to Debian and add more cameras to frigate.

Most important: replace the raspi SD card with an SSD

General hardware: see if I find a better solution than my current Proxmox box (repurposed desktop which consumes 60w idling but is capped to 16GB Ram)

Incoming traffic: currently having a VM that runs nothing but nginx and certbot. Considering switching to another reverse proxy and, more important, get proper monitoring of the logs (e.g. IP detection, 403, etc)

Maybe add some iam like authentik

Finding a solution for selfhosting podcasts client with sync on Android and Linux.. gpodder never really seemed to work, considering audiobookshelf.

Probably setting up calibre web and gethomepage

Keeping what I have and maybe optimize a bit:

• Prometheus stack
• plenty exporters
• Nextcloud
• paperless
• home assistant, mosquitto
• pihole
• vaultwarden
• selfoss

On VPS:

• Mastodon
• Bookwyrm
• some WordPress (want to move this to my homeserver as well)

I want to move my 4x SFP+ from their current MicroTik switch to my new Brocade. Then I'm very strongly debating running both VM and Ceph over the same 10Gbps connections, removing the ugly USB Ethernet dongles from my three Proxmox Lenovo M920q boxes.

After that? Maybe look at finally migrating Vault off my ClusterHat to Kubernetes.

Nothing fancy but I found an old RPI3 and want to selfhost Vaultwarden and piped on that thing to give my parents a way to watch YouTube without those nasty ads and give them a proper and easy way to store their password. (Over wireguard tunnel)

Also If the universe aligns buy a N100 or 200? To host my own router/switch setup and finally take advantage of my 5Gbit fiber 🫤. I still need to figure out how I get WiFi AP to work with a N100...

Not much but I have a lot other things to figure out but mostly software wise :).

I'm currently saving up to buy a fractal design node 804 to build a NAS with 4 drives within. Also trying to create some more reliable backups using said NAS.

Really a few things. What I am looking to do is create a highly dynamic system where I can easily deploy something by kicking off some automation. To do this I am first creating a base Ceph shared filesystem. This will be mounted in all VMs so that I can use Ansible to quickly spin up Docker containers via docker compose. This will make it much easier to dynamically create resources and services since I won't need to worry about all the underlying components. I simply kick off the automation for any changes. I already have the automation to create new VMs.