this post was submitted on 13 Jun 2023
8 points (100.0% liked)
Technology
37747 readers
180 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
It looks like the Quadro P600's displayports should support that resolution at that refresh rate. What driver stack are you running on your system?
Oops. It's a quadro 600, not p600. My bad. Using nvidia 390 driver.
It makes more sense now why you can't get to 144hz.
Displayport 1.2 seems to be able to go up to 1440p@144hz when it's 8bit color. This basically means any graphics card after 2010. You could probably pick up a cheap R7 450 or FirePro W4100 secondhand. Just make sure that the Nvidia drivers are removed and you're running open source drivers before swapping. Afterwards, amdgpu is generally the best driver for the aforementioned GPUs.
If you need more than that then you'll need a graphics card at least as new as the GTX 10 series or Radeon RX 400 series.
Thanks for the reply! Ended up doing some more research in the meantime and decided to just upgrade my mobo to full ATX so I can run two 2-slot GPUs and a coworker is just giving me an old 1050 which will do the trick..