tenzen

joined 1 year ago
sorted by: new top controversial old
Installed Sprite Extruder Pro kit and Ender v2 Intelligent display, but both won't work properly in c/3dprinting@lemmy.ml
[–] tenzen@lemmy.ca 1 points 1 year ago* (last edited 1 year ago)

I've installed the sprite pro on my ender 3 max. To get it going I compiled my own firmware and found that TH3D's firmware was simple and worked well.

https://www.th3dstudio.com/

Although it wasn't long and I added an rpi and installed Klipper.

For the bltouch, I didn't really spend time on it. The connector to the included board on the extruder didn't work - - I ran my own wire directly to the main board. Likely user error, but it's working so I stopped trying to fix it.

Hope this helps.

What is your unbiased opinion on Manjaro? in c/linux@lemmy.ml
[–] tenzen@lemmy.ca 1 points 1 year ago* (last edited 1 year ago)

I run linux on my gaming rig. I've had the best luck with performance of graphics cards with manjaro and pop. I am not a huge fan of gnome and prefer kde (FWIW, gnome works fine, I just prefer the feel of kde).

With the above in mind, I really like the newness of the packages on rolling distros like Manjaro/arch. Yes, it can break things but Manjaro tends to be a bit behind Arch on releases -- maybe this helps? The AUR is awesome. I also like several of the gui tools Manjaro has implemented to make graphics driver installs simpler.

Pop worked really well and was simplier for gaming -- especially on devices with hybrid graphics.

That being said, I haven't used Mint since the forums were hacked. I haven't used Ubuntu since they started devaluing their users (integrated Amazon?, forcing snap?). Fedora is nice but I found pop/manjaro better for gaming due to graphics support.

My advice to you -- what you are asking is one of the main benefits of linux -- personal choice.

So... get out your USB stick and try them. Use the forums to help you with the nuances and make each work for your needs. Then see what you prefer. Then donate to that project and its base project.

It's awesome to have choice.

voron 2.4 - anybody with actual experience in c/3dprinting@lemmy.world
[–] tenzen@lemmy.ca 1 points 1 year ago

So, I bought myself a rpi4 and installed Klipper. Very cool firmware quite enjoying it. Still tuning but i've got my speed up 3x from my Marlin based firmware. I think I'll continue looking at the options here recommended and build one -- mostly because I want to -- not because I am solving a problem. Thanks for putting me onto Klipper.

1
Messy edges on my prints (lemmy.ca)
submitted 1 year ago* (last edited 1 year ago) by tenzen@lemmy.ca to c/3dprinting@lemmy.world
0 comments fedilink
 

I'm trying to diagnose what tuning I need to get a smooth top layer on a solid print.

The picture you see is a 50mmx50mmx1mm square (cube([50,50,1]); in openscad) printed with a .4 nozzle. (5 layers)

For tuning on the problem, I have looked into:

  • z_offset -- tried all kinds of values and if I reduce it anymore, it doesn't squish into the bed and the center part is exactly 1mm -- so unlikely to be that.
  • bed level -- bltouch is working well
  • extrusion (esteps or rotational_distance) - played with this a great deal and any less and i start to have under-extrusion in the center area.
  • different filament -- same with PLA, PETG and ABS
  • Different slicer -- same with PrusaSlicer or Cura
  • Different speeds -- one on the left was printed at 20mm/s -- the right was printed at 150mm/s

I also cant find any guides out there that show this issue. Anybody with some suggestions or threads I can pull?

0
voron 2.4 - anybody with actual experience (vorondesign.com)
 

Hello,

I was interested in building a high end printer, mostly for the fun of it and learning what goes into it. I've been looking at the Voron and on the page looks really nice; however, I've been unable to find a lot of actual print quality, speed, and capability comparisons.

Does anybody here have experience or recommendations of other high end, self build, printer designs?

I'd be using my customized printer based on the ender 3 max platform.

Really, looking to improve in a few areas:

  • proper enclosure and venting so I don't continue to poison myself when printing abs.
  • elimination of ringing caused by that heavy bed swinging around at high speed
  • ability to ramp up the print speed past 50mm/s

I'd also love the ability to play with multi-matrtial printing, but not high on the list.

Thanks all