It's my favorite deck. I absolutely love the shape and size
jtskywalker
joined 1 year ago
I've been getting some problem layers with this filament, especially on flat pieces like this. The first layer is always good, but flat layers (top and bottom) that are not on the bed are not great, like the filament is sagging and not connecting to the lines next to it, regardless of if they are supported or not. This one was a flat layer (completely horizontal) that was fully supported with the zigzag supports from the sovol version of cura.
I know ideally I wouldn't have totally flat overhangs like this but with the piece I want to print there isn't really a way around that other than printing multiple flat parts and gluing them together.
I am using a Sovol sv06 and overture PLA. I did not have this issue with the sovol silk silver pla.
I've tried leveling my bed again and I think mu z offset is OK because the first layers look good. Currently I'm printing another temp tower and will try some other calibration pieces but any help is appreciated
The printer (sv06) just arrived yesterday and it has already saved the day for my kid.
His RC car stopped turning, and after taking the controllwe apart I found that the piece that actually turns the box inside was broken
I measured everything with my calipers and struggled with it in fusion 360 for like an hour, had to make adjustments and print again, and finally got this:
Put everything together and...
Success!
These are great! I spaced them so the brackets are mostly under the trucks and they are not very visible. I would definitely recommend PETG or at least extra walls and high infill if using PLA