blackstrat

At the moment I have my NAS setup as a Proxmox VM with a hardware RAID card handling 6 2TB disks. My VMs are running on NVMEs with the NAS VM handling the data storage with the RAIDed volume passed through to the VM direct in Proxmox. I am running it as a large ext4 partition. Mostly photos, personal docs and a few films. Only I really use it. My desktop and laptop mount it over NFS. I have restic backups running weekly to two external HDDs. It all works pretty well and has for years.

I am now getting ZFS curious. I know I'll need to IT flash the HBA, or get another. I'm guessing it's best to create the zpool in Proxmox and pass that through to the NAS VM? Or would it be better to pass the individual disks through to the VM and manage the zpool from there?

I've run my own email server for a few years now without too many troubles. I also pay for a ProtonMail account that's been very good. But I've always struggled with PGP keys for encrypting messages to non-Proton users - basically everyone. The PGP key distribution setup just seemed half baked and a bit broken relying on central key servers.

Then I noticed that email I set from my personal email to my company provided email were being encrypted even though I wasn't doing anything to achieve this. This got me curious as to why that was happening which lead me to WKD (Web Key Directory). It's such a simple idea for providing discoverable downloads for public keys and it works really well having set it up for my own emails now.

It's basically a way of discovering the public key of someone's email by making it available over HTTPS at an address that can be calculated based on the email address itself. So if your email is name@example.com, then the public key can be hosted at (in this case) https://openpgpkey.example.com/.well-known/openpgpkey/example.com/hu/pmw31ijkbwshwfgsfaihtp5r4p55dzmc?l=name this is derived using a command like gpg-wks-client --print-wkd-url name@example.com. You just need an email client that can do this and find the key for you automatically. And when setting up your own server you generate the content using the keys in your gpg key ring using env GNUPGHOME=$(mktemp -d) gpg --locate-keys --auto-key-locate clear,wkd,nodefault name@example.com. Move this generated folder structure to your webserver and you're basically good to go.

I have this working with Thunderbird, which now prompts me to do the discoverability step when I enter an email that doesn't have an associated key. On Android, I've found OpenKeyChain can also do a search based just on the email address that apps like K9-Mail (to be Thunderbird mail) can then use.

Anyway, I thought this was pretty cool and was excited to see such an improvement in seamless encryption integration. It'd be nicer if on Thunderbird and K9 it all happened as soon as you enter an email address rather than a few extra steps to jump through to perform the search and confirm the keys. But it's a major improvement.

Does your email provider have WKD setup and working or do you use it already?

Given there's been a bit of talk about IPv6 around here recently, I gave it a really good shot at implementing this past week. I spent 3 days getting up to speed, reading loads and trying various different things. But I am now back to IPv4 only because I just can't get IPv6 to do what I want and no amount of searching has made me think what I want to do is even possible.

Some background about the IPv4 network I run at home: I run opnsense on a Proxmox server. I have a few services publicly available using port forwarding. I run several VLANs for IoT, VoIP, Cameras etc. I use a bunch of firewall rules that are specific client devices on the network. So for example I have a rule that blocks youtube from the kids tablets and the TV. I have a special rule around DNS for the wife as she doesn't want to use the pihole blocking features. These rules are made possible because the DHCP server is set to give them a fixed IP and I can create a firewall alias and rule based on that.

None of these things on my existing network are particularly difficult to configure, they run really well.

What I want from IPv6 is:

1. All devices to use IPv6 including android devices.
2. To have the same firewall rules configured and not have them be easily bypassed.
3. To use privacy addresses as I don't want to make every device uniquely trackable over the internet.
4. To be able to cope with changes to the ISP provided /48 prefix seamlessly.
5. Have internal DNS make accessing intranet devices easy.
6. To ensure the privacy of individual devices on my network by avoiding individual device tracking.

What I've tried:

1. Using DHCPv6, but this excludes android devices. So that's out.
2. Using a NAT (to avoid tracking of individual devices) and fd00/8 addresses, but this is pointless as those addresses are lower priority than IPv4 (FFS!)
3. SLACC just seems a non-starter.

Additional: I don't think I have a problem with "thinking about it all wrong for IPv6". I may have a skill issue, hence this question.

As far as I can tell to achieve requirement 1) you must use SLAAC. SLAAC without privacy extensions doesn't allow for 6).

Changes to external ISP prefix assignment impacts MY INTERNAL NETWORK (this just seems insane). And as far as I can tell there's no easy way around this, especially if I have static addresses configured for servers which would (if using SLAAC) have to be manually configured.

I can't see how DNS would be updated either, either Unbound running on Opnsense, or to the pihole. If I go for SLAAC with privacy extensions and I keep paying for a static IP (v4 & v6) to my ISP then I can't implement any firewall rules for specific devices as devices will change their IP regularly. And its even worse if I don't pay for a static IPv6 prefix.

I don't think anything I'm trying to do is particularly strange or unusual but 26 years after its introduction I don't see that IPv6 can meet these requirements. And one of the leading firewall routers, especially in the homelab doesn't have answers to these questions either.

Can you suggest a way to meet all 6 requirements I have with IPv6?

I noticed that I wasn't getting many mails (I need better monitoring), and discovered that my iredmail server was poorly.

I have spent far too much time and energy on getting it back and working these past few days, but I've finally got it back up and stable.

Some background: I've had iredmail running for probably going on 6 years now and have had very few issues at all. It runs on an Ubuntu VM on Proxmox and originally was running in the same VM on ESXi (I migrated it over). I haven't changed anything to do with the VM for years other than the Ubuntu LTS updates every 2-3 years, it's always been there and stable. I occasionally will update the Ubuntu OS and iredmail itself, no problems.

Back to the problem... I noticed that Postfix was running OK, but was showing a bunch of errors about clamav not being able to connect. Odd. I then noticed that amavis was not running and had seemed to just die. I couldn't find any reason in any log file. Very strange. Bunch of hunting, checking config file history in the git repo. Nothing significant for years.

Find that restarting the server got everything back up and running. Great, lets go to bed.... Wake up next morning to find that amavis was dead again - it only lasted about 40 mins and then just closed for no reason. Right, ok, time to turn off clamAV as that seemed be be coming up a bit wheilst looking, follow the guide, all is well. Hmm, this seems to be working, but I don't really want clamav off. A whole bunch of duck duck going and I still couldn't figure out a root cause.

And then it clicked, the thing that was causing amavis to close was that it was running out of memory and it was being killed. Bump the memory up to 4GB and re-enable everything as it originally was and.... it seems to have worked. Been going strong for over a day now.

I don't know what it was that's changed recently which has meant the memory requirements have gone up a bit, but at least it's now fixed and it took all of 2 minutes to adjust.

The joys of selfhosting!

There's 3 things that really stand out for me that I would say made a massive difference to my life:

1. Cordless screw driver. Bought the day after building a flat pack bed with a crappy screw.driver that just shredded my hand. Thought it was frivolous at the time, but I've used it so much since. It's light, small enough to fit in my pocket and good for 90% of DIY tasks.

2. Tassimo coffee machine. Bought it 9 years ago, use it every day. Nice quick easy coffee. What's not to like.

3. My first DSLR camera. It was a Nikon D50 back in 2005/6 and it sparked my interest in photography to this day. It gave me a hobby I can take lots of places and do it alone or with others. I never loved the D50 camera itself, but I did get some really nice shots with it

The icon is a little different to what I've seen on others and I don't know how to tell otherwise. I have a job that involves drilling through a breeze block wall about 20cm and I don't want the expense of buying an SDS if I can help it.

This drill was given to me a long time ago, hence not knowing what I have here.

Thanks!

Seems like a shame to throw away and must have a use.

I hope you are all enjoying yourself and easing in to the weekend. And if you're working, I'll save a cold one for you