biffnix

joined 1 year ago
[–] biffnix@discuss.online 12 points 5 months ago

Precisely. I live near Yosemite National Park, and it would be an absolute disaster if there were enough hotels, campgrounds, and amenities to meet the demand. The demand FAR exceeds its capacity for tourists, but it would destroy the very reason for that demand if that actually happened.

So what did they do? Set rules for the number of tourists allowed in the park per day, and stuck to it.

[–] biffnix@discuss.online 1 points 10 months ago (3 children)

Very nice. Did it come with those bellows, or was that aftermarket?

[–] biffnix@discuss.online 2 points 10 months ago (8 children)

I also have the Virtuoso+, which was my first step beyond the blade grinders I had always used, and it's a big upgrade. You're going to really notice the difference in brews. Congratulations!

 

The nice thing I just learned about the Sette 30 ( which I just received as a Christmas gift) is that you can upgrade it to the micro-adjustment ring from the Sette 270/270wi model, and it's a direct replacement. This allows adjusting the grind between the "steps" on the adjustment ring.

The part is $90 (plus tax/shipping), and it does make it nice to fine-tune your grind between steps. The adjustment ring is easily removed (just press up slightly, and spin it out). The burr assembly pops right out, and you just replace it in the new assembly (press it until it clicks), and reinstall. Easy peasy, with no tools required.

The Sette 30 also came with shims to raise the burr, as it can be reset after extended use. I haven't installed the shim, since I don't need it yet, but it's nice to know that Baratza will sell parts to repair/replace over time.

Happy new year, my fellow caffeinated lemmings!

[–] biffnix@discuss.online 2 points 11 months ago

I did see this: Baratza single dose hopper with bellows. I don't have one, but that may be something I get later. I suppose a bellows might be decent at getting the last bit of coffee out of the burrs. It's not too expensive, so perhaps I'll give it a try...

[–] biffnix@discuss.online 6 points 11 months ago (1 children)

That’s the first guitar my parents ever got me - a 1983 Aria Pro IIrs “Wildcat.” Made in Japan (in the famed Matsumoku factory), it’s a Strat copy with dual humbucker pickups, and a push-pull volume knob that will coil-split either, for a good single-coil sound as well. For an inexpensive instrument (I think it was around $200 in 1983) it’s very well built. That’s why I’ve kept it all these years…

 

My wife gifted me a Baratza Sette 30 grinder this Christmas, after last year's first espresso machine, the Gaggia Classic Pro. Using the 'ol reliable Virtuoso for grinding was ok, and I could pull decent shots from the Gaggia, but the Sette 30 makes it so much easier. I love being able to put 18.5g of beans into the grinder, and get 18.5g out (usually). I did just pull the trigger on the 270 Adjustment Assembly, so I'll be able to dial in the grind even better soon.

I think I've reached my level in terms of coffee gear for now. I've got good options for a quick cup with the Moccamaster Cup-One, and when I'm in the mood for espresso or a latte, I've got the Gaggia.

I haven't tried grinding drip coffee with the Sette yet, though. I'll be giving that a try later this week. If that works well, I guess I'll have to take the Virtuoso to the office, and maybe donate it to replace their cheap blade grinder...

Happy holidays, all!

[–] biffnix@discuss.online 1 points 11 months ago

I guess my only question is, why is this happening when there is literally no wind blowing?

[–] biffnix@discuss.online 5 points 11 months ago

Well, I can say definitively that I know what is making that clicking sound. It's hard to see since the cable is in silhouette, but there are silver-colored spirals wound around the cable, and the sound is made by the plastic sheathing of the black cable wobbling inside of those metal spirals. The spirals are made of aluminum, I'm pretty sure. Those spirals are put there to stiffen the the hanging cable, and appear on the hanging cable between every set of poles (not just these, that are wiggling). There are two spirals mounted on each cable between the poles. I assume the spirals are mounted there to provide damping, just in case the wind does cause the cable hanging between the poles to swing too much. But, there was no wind blowing when I shot this video (Dec 5, 2023). The voice you hear is mine, just speculating on what might be causing the oscillating cable...

[–] biffnix@discuss.online 3 points 11 months ago

No, I've never tried to quantify the variables in that way. Just out walking the dog, and notice this strange behavior from time to time. I always assumed the poles were placed a specific distance apart, but honestly, I'm not sure. I suppose if I ever have the urge to pace it out to get a good estimate, I will...

[–] biffnix@discuss.online 2 points 11 months ago (1 children)

Hmm. It's odd that this isn't ALWAYS vibrating, but it IS only between these two poles that I've noticed the vibration. But why not between other sets of poles? And since the cable vibrating the most isn't a power cable (I believe it's fiber, but it could be copper - but it's definitely telecom, since it's not insulated on the top crossbar, as the other power cables are), it can't really be much power going through it. I'm kind of hoping someone else has seen similar behavior somewhere else. You can see the anti-wind-twist devices (don't know what else to call them) bolted to the other telecom cable (sort of diamond-shaped) and they will cause the cable to stabilize when the wind is really blowing, but you can see the wind isn't blowing at all, and the cable continues to vibrate quite noticeably. I really do hope someone else has seen something like it elsewhere...

 

I've seen this phenomenon many times over the years, while walking the dog out behind our house. The cables wiggle between these two particular power poles, but NOT between the adjacent poles (or any others, along this pole line). There is no wind, no earthquakes, no herds of animals or large vehicles/machinery anywhere nearby when this is happening. I honestly have no idea why this happens sometimes. Thoughts? I mean, sure, it's probably ghosts, right? But any other explanation would be appreciated...

 

I had to drive to Sacramento for a work conference this week, and took this photo as the sun rose over Mono Lake. I did like the haze over the tufa towers near the shoreline. Enjoy.

 

I took this the morning of Aug. 14, 2023. The sun was shining through clouds. It rained off and on all morning. This was on a short backpack in. My son's girlfriend had never been backpacking before, so we took her on this short overnighter. Taken with a Canon R5, 15-35mm f/2.8L lens.

 

This is one of my favorite campsites ever. This is sunrise over Evolution Creek and McClure Meadow, in the high country of the Sierra Nevada mountains, in Kings Canyon National Park, in California. I’m fortunate enough to live relatively close, in Bishop, California. Still, there are no roads here - you must make your way on foot, or by horseback or pack train.

I backpacked the roughly fifty mile loop, from North Lake to South Lake. Some do it quickly, but I enjoyed taking seven days for the loop.

Enjoy!

 

Iwakuni is where my parents met, in 1960. My little sister and I visited in March of this year, and were able to scatter my older sister’s ashes in the Nishiki river, and commit them to our ancestors. I haven’t visited the Kintai Bridge since I was a boy. It still looks the same. Fond memories…

 

Took this back in March, while visiting our daughter, who is teaching English in Japan for this past year. We took the opportunity to take a couple of weeks to travel around Japan. She is in Hirado, south of Nagasaki. I didn’t want to haul my DSLR, so I made do with the phone camera.