Sounds like TPU? Maybe soft one too.
Stampela
joined 1 year ago
Thanks, I think I get it. There’s a lot of humidity where I live too, so while not at the same scale, the problems are at least relatable. Best of luck with the project, it sounds like a cool but lengthy and complex journey that can really pay off!
Oh! The “brassic” guy! I don’t have much help to offer, but I didn’t know that term, had to look it up and found the tv show :D so thank you.
A tiny bit of potential help: you mention wanting to use desiccant in the boat. I’m obviously not an expert, but it sounds like a bad idea, as the stuff absorbs water… but maybe you mean in small amounts, so that wouldn’t make a difference.
Had access to cli, restarted HA and quickly disabled the Alexa integration: so far everything is working as intended :)
Similarly unfortunate situation for me, using the backup didn’t really help. But I DO have the Alexa integration, I guess next time I get HA between reboots I’ll disable that.
I think on my system it’s causing reboots. Not fun.
I’m thinking it looks like the print gets to a spot where it can get faster, and your hot end can’t keep up with the temperature required by that filament, causing under extrusion. If my guess is correct, it would show on a small test print (same settings) where you get looooong straight lines to allow for speed. And would disappear by slowing down. Since it looks like a relatively expensive filament I suggest you wait for more feedback before trying my test, just in case I got it wrong and my test would waste some filament for nothing.
Fortunately my thermometers don’t do that, because they are a good choice, Zigbee wise. Always on the lookout for replacements, if the need arises…
The bloody morons… why they say 16 tops if it can do better? It’s not like they don’t have access to 16gb sticks to test 2 of them! Like, I get when it’s “this supports up to” and that’s the largest available at launch, but this is just stupid. Thanks for correcting me!
super easy to upgrade to 32/48gb
Not on an N95/97/100 as they support max 16… https://ark.intel.com/content/www/us/en/ark/products/231803/intel-processor-n100-6m-cache-up-to-3-40-ghz.html so they can be repaired, but not upgraded.
LIDAR sucks, accuracy wise. If you want accuracy, and hate yourself, then you need an iPhone XR/XS because that was the generation with the most accurate FaceID (for whatever reason). Or go photogrammetry, the LIDAR can help but isn’t the main thing there… this is both free and great. With a Mac you can get the data processed faster, or it can be done (paid) via cloud, or with less accuracy and a bit of patience, on device. It’s not going to be a professional solution, but depending on the task it works and chances are the hardware is already there :)
view more: next ›
You might have some polypropylene there. Really strong material! Won’t stick to shit, temperature resistant, chemical resistant, can bend without breaking… never tried it, personally but it’s interesting stuff.