this post was submitted on 27 Nov 2023
51 points (96.4% liked)

3DPrinting

15629 readers
204 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee
51
Have you ever seen this type of print failure? (lemmy.world)
submitted 1 year ago by nucleative@lemmy.world to c/3dprinting@lemmy.world
13 comments fedilink hide all child comments
 

Pretty sure I'm having heat creep up the Bowden tube, as it's getting jammed a few cm back from the hot end and then can't push the filament any more. When I get it out there's a little molten bulb at the filament.

In this fail, I think it jammed as usual and the extruder found a way to keep going.

I tried turning down the hot end from 215 to 200 and it's still failing. My cooling fan is running at 100%.

This is the third time I've had this print fail at about this layer, around 1 hour into what will be a 26 hour print.

Any ideas?

you are viewing a single comment's thread
view the rest of the comments
[–] nucleative@lemmy.world 1 points 1 year ago (1 children)

Thanks for all the comments and suggestions! I've cleaned the whole thing up and I changed the PrusaSlicer retraction length from 6mm to 2mm. Let's see if this changes the result.

This printer is mostly stock Ender 5 Plus. I upgraded to an all metal extruder (original one broke) and capricorn bowden tube a while back. Usually the defaults have been OK and I print often.

My extruder gear leaves quite a track mark on the side of this filament and I wonder if this is contributing. I'm in a very hot and humid region and this spool is about a year old. I did have it in my filament dryer for about half a day right before this print, so it was more malleable than usual.

Oh, and this print is a print-in-place retractable cosplay katana, so there is a ton of intricate details which seems to result in a lot more retractions and tiny movements than usual.

[–] rambos@lemm.ee 1 points 1 year ago (1 children)

Hope it works this time.

When filament is jammed at any place in its path this can happen. It seems like extruder is working fine and leaving teeth marks on the filament is normal.

It could be that 6mm retraction length can work, but it jams on job that requires too many retractions. Its best to do a retraction test and pick the lowest possible distance that leaves no stringing or just live with accaptable amount. 6 mm distance is more suitable for longer bowden tubes, I guess you should be between 1-4 mm.

There is also a slicer setting that limits number of retractions per length of filament. Then slicer ignores some retractions to protect the print job from failing (usually extruder grinding)

[–] nucleative@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

Thanks for these useful suggestions. I'm learning all about how retractions work now and surprised I never ran into issues like this before.

We are about 4.5 hours into another attempt (previous all failed around 1hr), now with the updated retraction length. It's still going strong. Seems like this is the solution!